Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.
ABOUT THE TEAM
The Maritime Manufacturing Technology team is responsible for rapidly developing and implementing manufacturing technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.
ABOUT THE JOB
As a Hydraulic Assembly Technician, you'll build up the hydraulic assemblies that open or actuate doors, operate valves, and drive launch mechanisms, systems that run at 3,000+ PSI with zero tolerance for leakage or contamination. Your work spans precision assembly of cylinders, actuators, valve manifolds, hydraulic power units (HPUs), and accumulator banks. Every assembly you build will be proof-tested and inspected to naval or program standards before it leaves your bench.
WHAT YOU’LL DO
Assemble hydraulic cylinders, actuators, servo valves, manifold blocks, HPUs, and accumulator banks per engineering drawings and work instructions.
Install seals, O-rings, backup rings, and dynamic sealing elements using proper lubrication, orientation, and stretch/compression specs.
Fit, lap, hone, and scrape mating surfaces to achieve required surface finishes and seal-face flatness.
Torque fasteners to spec using calibrated hand tools and hydraulic torque equipment.
Assemble and plumb hydraulic tubing, fittings, and flex hoses within self-contained subassemblies.
Perform hydrostatic proof-pressure and leak testing on completed assemblies.
Conduct pneumatic (air) testing where required by procedure.
Perform functional testing: stroke cylinders, cycle valves, verify actuator response and speed.
Document test results, pressures, leak rates, and cycle counts per quality requirements.
Identify and troubleshoot failures: disassemble, diagnose root cause, replace components, and re-test.
Complete hardcopy and electronic documentation: assembly travelers, inspection records, material traceability, torque logs.
Maintain compliance with SUBSAFE, SOC, and Level I requirements as applicable to submarine hydraulic systems.
Support customer and government inspections of completed assemblies.
Identify non-conformances and process through proper disposition channels.
REQUIRED QUALIFICATIONS
High school diploma or GED.
5+ years of hydraulic assembly, hydraulic maintenance, or precision mechanical assembly experience.
Ability to read and interpret mechanical assembly drawings, hydraulic schematics, and detail drawings.
Experience with precision measuring tools (micrometers, calipers, bore gauges, dial indicators).
Proficiency installing hydraulic seals, O-rings, and dynamic sealing elements.
Experience with torque-controlled fastener installation.
Familiarity with hydrostatic and pneumatic test procedures.
Willing to work any shift and overtime as production requires.
Must be a U.S. Person due to required access to U.S. export controlled information or facilities.
Eligible to obtain and maintain an active U.S. Secret security clearance.
PREFERRED QUALIFICATIONS
Experience with SUBSAFE, SOC, or Level I controlled hydraulic assemblies.
Military shipbuilding, submarine, or naval shipyard experience.
Experience with cleanliness-controlled assembly (NAS 1638, ISO 4406, or equivalent).
Background in aerospace, defense, or AS9100 / ISO 9001 environments.
Familiarity with hydraulic power units, accumulators, and servo valve assemblies.
Fluid power certification (IFPS or equivalent).
Experience with hydraulic cylinder rebuild and actuator overhaul.
Completion of apprenticeship, vocational program, or military MOS in hydraulic/mechanical systems (e.g., Navy HT, GSM, or equivalent).
US Hourly Range
$99,000 - $130,000 USD
The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including:
Benefits
At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.
Protecting Yourself from Recruitment Scams
Anduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.
To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:
No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.
Please always verify communications:
Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.
Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to contact@anduril.com.
Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.
What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to contact@anduril.com. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.
Data Privacy
To view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/.
By submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.